3 Main kinds of PCB Assembly process
The Printed Circuit Boards Assembly
The printed circuit board assembly is the
process of mounting or placing electronic components which give the board its
functionality. The electronic components can be mounted by manual and automatic
techniques, and then they are soldered in place.
It would help if you did not confuse it
with printed circuit board (PCB) manufacturing which involves the production of
the PCB and creating prototypes. Covers the installation of electronic
components during the assembly process, and the board is called the PCBA or
printed circuit board assembly.
1.Printed Circuit Boards Assembly Process
Differences in Printed Circuit Boards
Assembly Process
You can use a different type of
technologies to assemble the electronic components on a PCB. The main methods
include Thru-Hole Technology (THT), Surface Mount Technology (SMT) and Mixed
technology.
1).Through-Hole Technology (THT)
THT assembly makes use of both manual and
automatic processes to place the components on the PCB. Proceed as follows
Placing Components
Electrical engineers manually place the
components on the PCB according to specifications. It has to be done quickly
and accurately with full compliance to operation standards or regulations of
THT assembly process for proper functioning.
Examining and Correction
You need to check if all the electronic
components on the PCB have been placing accurately. It can be done
automatically with the use of a transport frame. If you find any errors or
mistake, the engineers can quickly rectify it.
Wave Soldering
These electronic components have to be
soldered to the board in this step. You can do it manually, but a far more
efficient and automated process called Wave soldering can be used.
2) Surface Mount Technology (SMT)
SMT?is the automatic process of placing or
mounting electronic components on a PCB. SMT enables you to speed up the
production process, but there are increased chances of defects. For this
reason, the process also employs failure detection for creating functional
products.?
Applying Solder
You have to use a solder paste printer to
apply solder to the PCB. A solder screen or stencil is used to ensure the
proper application of solder at valid points where electronic components will
be placed.
Placing Components
A pick-and-place machine is used to mount
the electronic components after solder printing. The machine automatically
mounts the IC or components through component reels. They components reels are
responsible for feeding the components to the machine which are then fixed onto
the PCB.
Reflow Soldering
This step uses a specialized oven to harden
the solder paste so that the components can be fixed firmly to the board. The
PCB is carried inside a series of heaters which raise the temperature of the
board to 250 degree Celsius. The high temperature melts the solder on the board
Next, the PCB moves through a series of
cooler heaters which bring down the temperature and help the solder to harden.
That adheres all the electronic components firmly to the PCB.
Mixed Technology
In the modern age, electronic products have increased in complexity requiring the use of different electronic components on PCBs. You will find the use of both THT and SMT technologies in a single PCB which contains both surface mounted and through-hole components.
